[httperf] httperf error (httperf: connection failed with unexpected error 99 )

Arlitt, Martin martin.arlitt at hp.com
Mon Feb 13 11:00:44 PST 2012


Hi Mohit

Have you verified that you are able to complete even a single HTTP request/response transaction to the server on that port? Normally, I would expect to see at least a few complete successfully, but the output below indicates they all failed.

Thanks
Martin


From: httperf-bounces at linux.hpl.hp.com [mailto:httperf-bounces at linux.hpl.hp.com] On Behalf Of Mohit Dhingra
Sent: Monday, February 13, 2012 10:46 AM
To: httperf at linux.hpl.hp.com
Subject: [httperf] httperf error (httperf: connection failed with unexpected error 99 )


Hi,

I am getting an error while running httperf test.
-----------------------------------------------------------------------------------------------------------------------------------------------------------
cadlab:~/Documents # httperf --server 10.112.10.35 --port 4567 --num-conns 20000 --rate 2000 --timeout 1
httperf --timeout=1 --client=0/1 --server=10.112.10.35 --port=4567 --uri=/ --rate=2000 --send-buffer=4096 --recv-buffer=16384 --num-conns=20000 --num-calls=1
httperf: connection failed with unexpected error 99
Connection rate: 470.9 conn/s (2.1 ms/conn, <=1 concurrent connections)
Connection time [ms]: min 0.0 avg 0.0 max 0.0 median 0.0 stddev 0.0
Connection time [ms]: connect 0.0
Connection length [replies/conn]: 0.000

Request rate: 0.0 req/s (0.0 ms/req)
Request size [B]: 0.0

Reply rate [replies/s]: min 0.0 avg 0.0 max 0.0 stddev 0.0 (0 samples)
Reply time [ms]: response 0.0 transfer 0.0
Reply size [B]: header 0.0 content 0.0 footer 0.0 (total 0.0)
Reply status: 1xx=0 2xx=0 3xx=0 4xx=0 5xx=0

CPU time [s]: user 0.00 system 6.71 (user 0.0% system 157.9% total 157.9%)
Net I/O: 0.0 KB/s (0.0*10^6 bps)

Errors: total 2000 client-timo 0 socket-timo 0 connrefused 0 connreset 0
Errors: fd-unavail 0 addrunavail 0 ftab-full 0 other 2000
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

I searched on Internet about the same, it says, it's due to limited no. of ports. Adding --hog solved the problem for them. But, here, i am looking for data from a particular port itself 4567. I think --hog doesn't make sense. And it just hangs when I do the same.

----------------------------
Thanks & Regards
Mohit Dhingra
+919611190435

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://napali.hpl.hp.com/pipermail/httperf/attachments/20120213/737ed05c/attachment.htm


More information about the httperf mailing list