This is a calculator that operates on "exact" real numbers.
More precisely, numbers are represented internally so that
they can be evaluated to any needed precision. As a
result, the displayed numbers are accurate to
an error of strictly less than 1 digit in the last displayed
digit, no matter how the number was computed. Subexpressions
are evaluated to enough precision to ensure that cumulative
rounding errors remain invisible.
These instructions apply to the caluclator's RPN mode.
A section at the end explains the differences in algebraic
point the calculator contains a downward-growing stack of
numbers. A number can be added to the bottom of the display
by typing the digits and pressing the button.
Most calculator operations operate on the bottom one or two
numbers in the display, and replace them with the result
of the operation.
1 + 2 is entered as 1 enter 2 +.
This entry method avoids the need for parentheses and makes
better use of a two-dimensional display.
The calculator window is composed of several regions.
From top to bottom they are.
The main display.
This displays numbers entered into the calculator and results.
Newly entered or computed numbers appear toward the bottom of the
display. If more numbers are entered than fit into the display,
a scrollbar on the right can be used to move between them.
Calculator commands can be entered either by using the keypad
(see below) or by typing with the display as the input focus.
Right-to-left scrolling control for the display.
Immediately below the display is a scrollbar and a small text
window. Either can be used to control right-to-left scrolling
of the display. At any point, the small text window displays the
weight of the rightmost displayed digit. If the window reads -125,
then the rightmost displayed digit is 125 digits to the right of
the decimal point, and thus has weight 10125.
This value can be adjusted either by editing the text window,
or by using the slide control. Note that very large negative
values are likely to require substantial time and memory to update
the display. (Values below -1000 are likely to produce annoying
pauses. Values below -10,000,000 are likely to result in error
messages, possibly after a very long pause.)
Large positive values are likely to result in all significant
digits moving to beyond the right side of the display. This
is indicated by a display entry of -->.
Note that the scrollbar has a comparatively limited range, and
its resolution is far better near 0 than away from 0.
The keypad area.
This includes a control panel area on the left, and the main
calculator keypad on the right. The control panel area includes
several buttons whose labels change in response to the state
of the calculator. These are often useful simply for determining
The history window.
This includes recently entered commands, in the form
in which they could have been typed on the computer keyboard.
The text area is edit-able and, with the aid of the
replay button, can be used to correct and replay
previously entered commands. (On many platforms it also provides
a somewhat clumsy mechanism for pasting in numbers from other sources
which bypasses the restrictions on clipboard access from Java applets.)
Keypad and keyboard commands
Most commands can be entered either by clicking a keypad button on the
screen, or by typing a single character on the computer keyboard.
Here we list first the keypad label for the command, and then the
equivalent keyboard characters for each command.
They are listed approximately in the order in which they appear on the keypad.
Replace the last entry in the display by its reciprocal.
The entry must be nonzero. A zero entry will cause the calculator
to run until it is explicitly stopped, exhausts memory, or exceeds
an internal limit on requested precision. (The calculator cannot
determine whether an entry is exactly zero. You will be asked if
you want to proceed if the entry appears to be zero. The recommended
answer is "no" unless you believe the entry to be very small but nonzero.)
sqrt, r, R
Replace the last displayed entry by its square root. The entry
must be nonnegative.
exp, x, X
Replace the last displayed entry y by ey.
ln, l, L
Replace the last displayed entry by its natural logarithm, i.e.
logarithm base e. The entry must be positive. The
base 10 logarithm can be computed by dividing by ln(10).
If the second to the last entry is x and the last entry is
y, replace them both by xy. Since this
deals with arbitrary exponents, x is required to be positive.
Clear either an incompletely entered number, or the bottom entry on
the stack. The key on the keyboard deletes just the
last entered digit. If there is no incomplete entry,
behaves like #.
Replace the last entry by its sine. By default, the argument is
in radians. In degree mode, this and the next two functions
interpret their argument as a number of degrees.
Replace the last entry by its cosine.
Replace the last entry by its tangent.
Add the mathematical constant pi (the ratio of a circle's circumference
to its diameter) to the end of the stack.
C All, @
Delete all numbers and any incomplete entries from the stack.
Replace the last entry by its arcsine. The argument must be between
-1 and 1, inclusive. By default, the result is in radians and between -pi/2
and pi/2. In degree mode, the answer is between -90 and 90.
Replace the last entry by its arccosine. The argument must be between
-1 and 1, inclusive. The result is between 0 and pi (0 and 180).
Replace the last entry by its arctangent. The result is between
-pi/2 and pi/2, exclusive, or between -90 and 90.
Divide the second to the last entry by the last one.
Replace both by the result.
The last one must be nonzero.
xchg, i, I
Exchange the last two entries on the stack.
Replace the last two stack entries by their product.
Store M, :
Copy the top of stack to a separate memory location.
Subtract the last stack entry from the previous one.
Replace both by the result.
get M, g
Append the contents of the memory to the stack as the last entry.
Replace the last two entries on the stack by their sum.
copy, q, Q
Append a copy of the previously last stack entry as the last
Change the sign of the last stack entry, i.e. multiply it by -1.
enter, $, <blank>, <return>
Convert the previously entered digits (and possibly decimal point)
into a real number and append it to the end of the stack.
All other operations that affect or use the last stack entry do
this implicitly before they perform their operation.
Thus this is needed only if multiple numbers are appended
to the stack without intervening arithmetic operations.
Decimal digits used to enter numbers.
Decimal point for numeric entry.
(no keypad equivalent), a-f
Hexadecimal digits. Can be entered only from keyboard. Valid only
in hexadecimal mode.
The control panel provides several additional keys and checkboxes which
for purposes other than entering numbers or performing operation on
the stack. Several of them also serve to indicate the
stop or STOP!, (no keyboard equivalent)
Aborts the operation of the calculator, e.g. after a nonterminating
computation was inadvertently started. A label of "stop" indicates
that the calculator is currently idle, and the button has no effect.
If the button is labeled "STOP!", then a calculation is in progress.
(Note that some Java implementations force a delayed response to this button.)
HELP!, (no keyboard equivalent)
Pop up a window with short instructions for the calculator.
replay, (no keyboard equivalent)
Interpret the selected text in the history window as command
input to the calculator. This can be used to replay a previous
computation with different inputs, or to add a number that was
previously pasted into the history window to the calculator stack.
Select the right commands in the history buffer before pushing
write, w, W
Write the last entry on the stack to the Java console.
The output includes all digits to the left of the rightmost one
currently displayed, including those to the left of the display
window. (Most browsers do not make the Java console visible by
default, but provide an option to make it visible. Most also
make it possible to copy text from the Java console to
elsewhere on the desktop. It is generally not possible for
Java Applets to write directly to the clipboard. Hence this
option was chosen.)
base 16, !
A checkbox that allows selection of base 16 (hexadecimal) mode.
This affects only number entry and display.
To convert between bases, first enter the number and then switch bases.
A checkbox that allows selection of degree mode. Affects trignonometric
and inverse trigonometric functions. Default is radian mode.
In this mode binary operators are entered between the operands.
They are carried out when the next operator or = is entered.
1 + 2 is entered as 1 + 2 =. Operations are executed
strictly left-to-right, with no precedence distinctions for binary
operators. Unary operators are still entered after the operand.
In this mode the stack display is limited to two entries.
The pending binary operator is displayed between them.
The history window and reexecution are not currently supported in
this mode. The scroll bar works as in RPN mode.
The set precision operation is treated as a unary operation,
and must thus be entered with the stack empty. To preserve a previously
computed value, store it in the memory, and then clear the entry.